تعلم فن المكرامي الدرس الخامس والستون شرح بالصور عقدة Feather Bar

 تعلم ضفائرالمكرامي الدرس الخامس والستون  شرح بالصور 

عقدة Feather Bar

BRAIDS and BARS

صفحتنا على الفيس بوك



Feather Bar
                              FRONT                                 BACK
                             
 
Description:  The Feather Bar is a unique decorative knot that's suitable for a variety of Macrame projects.  

Paracord bracelets and belts can be constructed with this reversible design, along with pet leads, plant hangers, and more.
 
 
 
This design came from the Fusion Knots website.

Designs by JD Lenzen

Click on the image or link to view his knot gallery, and see video tutorials for a variety of interesting knots.

You can find this design under the name:
 Back to Back Feather Bar

Fusion Knots
 



Preparation


To practice this decorative knot, cut one cord of each color, 2 yards long.   Prepare the ends to prevent unraveling.  For Paracord, heat and melt the tips.

The steps below show you how to make the Feather Bar around a loop, which is the best method if you want a clasp. 

When practicing, the clasp is optional.  You can simply secure the two cords on your board with pins, or attach them to a holding cord temporarily.

 
Size of Bar

Fold one cord in half, creating a long bight.  The knots will be tied around this bight, so make it's the size you want the Feather Bar to be when it's finished.  Add 1 inch if you want a loop.  

Use the right half of the cord to make a clockwise loop, passing over the left half.
 

Left Half

Make a counter-clockwise loop with the left half of the cord. 

Bring it over the right half, under the bight in the center, and through the right loop (under - over).

Tighten the two loops slightly by pulling on the ends.


Second Cord

Add the second cord, passing the ends through the two loops of the first.  Pull the ends of the first cord to tighten the loops firmly.

When making a clasp, the button, bead, or button knot would be attached to the center of the second cord. 



divider

Feather Bar Process


For the following instructions, color A is purple, and color B is yellow.   Each cord has a right and left end, which are used to tie the knots (working ends).

The bight acts as a holding cord, with two portions (right and left).

The key to successfully creating this design is to use the ends of one color at a time. 

Pay close attention to the position of the two cords before you tie each knot.

The ends will switch places, so use the ends where they lie at the beginning of each step.


Color B Right

Step 1:  Move the right end of color B  to the left, passing under - over the bight.

Bring it under the left end of color B.


Color B Left

Step 2:  Move the left end of color B  under the left half of the bight. 

Pass it over the right end of color B, and the right half of the bight, on a diagonal slant.

Bring the end under the right portion of color B further up.


The entire Feather Bar is made following steps 1 and 2.   You will simply alternate the colors and starting positions of the cords. 

Below are some tips and important points to follow as you continue:


Color A = Under

Important:  Move the ends of Color A under those of the Color B cord.  

Do this before you tie any of the knots using color A.

After the ends are positioned, use them to tie the next knot (steps 1 and 2).  In this image, the path of the right end is labeled in white.  The left end is in black.


Color B = Over

Important:  Move the ends of Color B over those of the Color A cord.  

Do this before you tie any of the knots using color B.


Width

When tightening each knot in the Feather Bar, try to maintain the same width as you progress.  The area at the top will be narrower than the rest. 

Also, make sure the design remains flat at all times.


Square Knot

Stop when the band is the size you want, or is 1-inch from the end of the bight.

Tie a Square knot with two ends (same color), around the bight and the other two ends. 

The remaining portion of the bight is then used as part of the clasp.



 
Macrame Cord Divider
 

 


صفحتنا على الفيس بوك




ماكرامي، مكرامي ،تعلم ، مكرامي ، خياطة ،أشغال يدوية ،فن مكرامي،صندوق ابيض،عروس ،زوج ، حمل ،طبخ ،حلويات ،أشغال يدوية ، للعرائس،قنادر ،خياطة ، ،شرح ،mkrami2014ماكرامي، مكرامي ،تعلم ، مكرامي ، خياطة ،أشغال يدوية ،فن مكرامي ،شرح ،mkrami2014  عمل علبة للاكسسوارات ,طريقة عمل علبه للاكسسوارات انيقه ,طريقة عمل قفص للاكسسوارات جميل وانيق , عمل علبة اكسسوارات غير مكلفه ,عمل قفص للاكسسوارات بالصور,طريقة عمل علبة اكسسوارات بالصور ,شرح طريقة عمل علبه للاكسسوارات بالصور ,اسهل طريقه لعمل علبة اكسسوارات ,طريقة عمل علب الاكسسوارات ,طريقه عمل قفص للاكسسوارات بالصور ,اعمال فنية.اشغال يدوية بالعجائن.عجينة الملح والسيراميك.اعمال فنية.اعمال بالورق،طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش اضغط هنا وأنشر الموضوع على صفحتك، تسريح الشعر ، عروسة ، رمضان 2014، مكرامي 2014 ، lmvhld 2014Klhmvhld 2014Kماكرامي، المركامياعمال فنية.اشغال يدوية بالعجائن.عجينة الملح والسيراميك.اعمال فنية.اعمال بالورق،طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش اضغط هنا وأنشر الموضوع على صفحتك، تسريح الشعر ، عروسة ، رمضان 2014، مكرامي 2014 ، lmvhld 2014Klhmvhld 2014Kماكرامي، المركامي 
 مكرامي, الخامسة, كرية, عقدة, غرزة

ليست هناك تعليقات: