تعلم فن المكرامي الدرس السابع و الاربعون شرح بالصور عقدة Spanish Hitching


 تعلم فن المكرامي الدرس السابع و الاربعون 
شرح بالصور
 عقدة

Spanish Hitching

صفحتنا على الفيس بوك


Spanish Hitching

 
Spanish Hitching
 
 
Description: Spanish Hitching is a unique way to cover dowels and other tube shaped objects, such as wine bottles and drinking glasses. This Macrame design features the Clove Hitch.
Since the knots used in this design are hitches, they need to be attached to a holding cord, which wraps around the item you are covering.
I've included instructions for tying the Clove Hitch in two different directions, since you need to know both.
 
 
 

Clove Hitch Instructions

 
 Spanish Hitches


 
To properly create Spanish Hitching, you need to know how to tie the Clove Hitch in both directions. The diagonal area in the front needs to head in different directions.
Design Tip: A good way to remember the steps is that for a right Clove Hitch, the first loop you make is on the right.
For a left Clove Hitch, the first loop is on the left.
 
 

Right Clove Hitch

 
 
Step 1: Secure a holding cord horizontally to your board, so it has tension.

 In the images, that's the blue cord. Secure a working cord to your board, so it is vertical.
 
 
  Create the first loop by directing the working cord over the holding cord, and then under it.
Bring it over the secured portion, as you move it to the left (counter-clockwise).
  First Loop on Right
 
 
 
  Step 2: To make the second loop, which is on the left, pass the working cord under the holding cord, and then over it (clockwise).
Direct the end under the working cord in the diagonal area between the two loops.
  Second Loop on Left
 
 
 
  Step 3: Remove the slack from the right loop, followed by the left.
Note that the segment in front crosses right to left, which is shown by the arrow.
  Completed Clove Hitch
 
 
 
 

Left Clove Hitch

 
 
  Step 1: Arrange the two cords as you did in the previous instructions. Pass the working end over the holding cord, and then under it.
As you rotate the end to the right, pass it over the secured portion, to form a clockwise loop.
  First Loop on Left  
 
 
  Step 2: Direct the working end under the holding cord, to the right of the first loop.
Bring it over the holding cord, and under the diagonal portion of the working cord, in the area between the two loops (counter-clockwise).
  Second Loop on Right  
 
 
  Step 3: Remove the slack from the left loop first, followed by the right.
Note that the segment in front crosses left to right, which is shown by the arrow.
  Completed Clove Hitch  
 
 

 

Spanish Hitching Design

 
 
Now it's time to work on the actual Spanish Hitching design. Note that these instructions are for practicing only.  To use this design in a Macrame project, the cords need to be longer.
Step 1: Start by cutting 10 working cords, each at least 25 inches long. Cut one holding cord, 36 inches long.
Secure the holding cord to the back of a paper towel tube, or a dowel. Secure the working cords to the top of it, so they are vertical. You can use masking tape to secure the cords.
 
 
  Left Clove Hitch   Bring the holding cord around to the front of the dowel, heading left to right. Tie a row of left Clove Hitches onto the holding cord, using each of the working cords.
Move left to right as you tie the knots. The first row should be as close to the top as possible.
 
 
 
When you get to the back, where the end of the holding cord is taped, tie the Clove Hitches around the secured end as well.

So you are tying them around two portions of the holding cord.
 
 
  First Row of Knots   This shows what the first row of Clove Hitches will look like when you are through. Make sure the row is straight, so the Spanish Hitching looks neat.  
 
 
  Wrap Holding Cord   Step 3: Wrap the holding cord around the item you are covering, so it rests below the first row of knots.  
 
 
  Second Row of Knots   Step 4: Tie a row of right Clove Hitches. Tighten them so they rest just below the first row of knots.
You can tie these knots moving in either direction, but it's a little easier if you tie them left to right.
 
 
 
  Detail of Both Rows   Here's an image of the two rows when they are completed.
 
 
 
  Comparison of Four Rows   To continue, wrap the holding cord around, and tie the next row with left Clove Hitches. The following row should be right.
Here you can see there is an obvious difference between the two directions.
 
 
 
 
 
صفحتنا على الفيس بوك





ماكرامي، مكرامي ،تعلم ، مكرامي ، خياطة ،أشغال يدوية ،فن مكرامي،صندوق ابيض،عروس ،زوج ، حمل ،طبخ ،حلويات ،أشغال يدوية ، للعرائس،قنادر ،خياطة ، ،شرح ،mkrami2014ماكرامي، مكرامي ،تعلم ، مكرامي ، خياطة ،أشغال يدوية ،فن مكرامي ،شرح ،mkrami2014  عمل علبة للاكسسوارات ,طريقة عمل علبه للاكسسوارات انيقه ,طريقة عمل قفص للاكسسوارات جميل وانيق , عمل علبة اكسسوارات غير مكلفه ,عمل قفص للاكسسوارات بالصور,طريقة عمل علبة اكسسوارات بالصور ,شرح طريقة عمل علبه للاكسسوارات بالصور ,اسهل طريقه لعمل علبة اكسسوارات ,طريقة عمل علب الاكسسوارات ,طريقه عمل قفص للاكسسوارات بالصور ,اعمال فنية.اشغال يدوية بالعجائن.عجينة الملح والسيراميك.اعمال فنية.اعمال بالورق،طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش اضغط هنا وأنشر الموضوع على صفحتك، تسريح الشعر ، عروسة ، رمضان 2014، مكرامي 2014 ، lmvhld 2014Klhmvhld 2014Kماكرامي، المركامياعمال فنية.اشغال يدوية بالعجائن.عجينة الملح والسيراميك.اعمال فنية.اعمال بالورق،طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش , طريقه عمل خداديه كلها ورد من نفس القماش اضغط هنا وأنشر الموضوع على صفحتك، تسريح الشعر ، عروسة ، رمضان 2014، مكرامي 2014 ، lmvhld 2014Klhmvhld 2014Kماكرامي، المركامي 
 مكرامي, الخامسة, كرية, عقدة, غرزة
Macrame Cord Divider

ليست هناك تعليقات: