الفن المكرامي الدرس 135شرح بالصور عقدة Double Coin Patterns

الفن المكرامي الدرس   135شرح بالصور عقدة Double Coin Patterns صفحتنا على   facebook

Description: These Double Coin Patterns both start out with the Josephine knot, also called the Double Coin Knot.   This decorative can be used as a starting point to form other shapes and knot designs like the two shown on this page. I had a little fun while I was tying the knots, as you can see in the image above. Children can make a project of tying decorative knots to make interesting shapes, so encourage them to practice. The Wide Lanyard knot has a rectangular shape, with a wide loop at the top. The Mayan temple knot has a rounded triangular shape, with an opening near the center. Both of these knot designs are suitable for pendants or focal points for Macrame bracelets.   The material used in the example is Paracord, which needs to be prepared and finished by melting the ends with a flame.     It helps if you label the ends with different types of tape, so you can tell them apart.

I found these designs in Decorative Fusion Knots, written by J.D. Lenzen. Be sure to click on the link or image to visit his website, which has a large gallery of interesting knots, along with video tutorials.

Double Coin Knot Instructions

Step 1: Secure the center of the cord to your board.  Make loop 1 with the left end, in a counter-clockwise direction.  Pass the end under to form the crossing point on the left. Step 2:  Move the right end over loop 1.  Moving clockwise, bring it under the left end, as you bring it towards the top. Step 3:  Weave the right end through loops 2 and 1, heading down and to the right,  over - under - over - under. Arrange the three loops as shown in the instructions for the Double Coin Patterns described below.

Step 1 Step 2 Step 3

Wide Lanyard Knot

Step 1: Tie a large Double Coin Knot in the center of a 60-inch cord. Mentally label the loops as shown, and the ends where they are resting now.

Design Tip: The weaving sequences in each step of both Double Coin Patterns is very important, so be sure to look at the images closely.  You can click on each one to see a larger view.

Step 2: Fold the right end to form Bight A, moving counter- clockwise. Weave under - over - under - over the segments, as you bring it to the upper left.

Step 3: Fold the left end to create Bight B, moving clockwise. Weave over - under - over the three segments. Before you move on, spread everything out, so the bights are as wide as possible.

Step 4:  Bend the left end down and to the right, through the middle of bight A.  It should just rest on top for now. Secure the end to your board.

Step 5: Weave the right end down through the middle of Bight B. Start by passing over loop 1 at the top of the knot, and over the left end, where it bends. Bring it under - over - under - over the next four segments.

Step 6: Use the left end again, which is resting on top of Bight A at the moment. Weave it under - over - under the three segments closest to the bottom of the bight.

Step 7: Tighten and balance the knot, but leave some space.  You can now use a second cord to double the knot and make it thicker (optional).

Step 8:  Tighten the knot further, progressing slowly from one end to the other. Double Coin Patterns should be tightened firmly to form the desired shape.

Mayan Temple Knot

Step 1:  Both Double Coin Patterns start the same way, with a Josephine/Double Coin knot.  Use the instructions further up on the page.  Mentally label the three loops as shown, and the ends where they are resting now.

Step 2: Create bight A with the right end, moving counter-clockwise. Weave under - over - under - over the four segments, as you bring the end to the upper left.

Step 3: Create bight B using the left end, moving clockwise. Pass over - under - over the segments of Loop 3. Bring it over the right end, and under the upper portion of Loop 1.

Design Tip:  Double Coin Patterns have very specific weaving styles, so pay close attention to the following details.  Spread the loops and bights so you have plenty of room to work.

Step 4: Bring the right end (now on the upper left) under the top of Loop 1. Weave over - under - over - under - over the remaining segments, curving it so it goes down through the middle of bight B.

Step 5:  Bring the left end over the top of Loop 1, on the right side of the knot.  Weave it under - over - under - over - under the remaining segments, as you curve it so it goes down through the middle of bight A.

Step 6: Tighten the Mayan Temple knot carefully, removing the slack from the loops from one end to the other.